The TSP Marketplace > MURS-Radio.com

TYT Programming Software - Common Issues

(1/1)

rob_ma:
In response to the locked thread I would like to add some information that others might find helpful when using the TYT programming software:


1) You must install the Prolific USB driver for the computer to recognize the programming cable. The USB driver can be downloaded from the TYT website. In some cases, customers have had better luck with this one: http://valley-ent.com/catalog/usb_drivers.php

2) You must choose the correct COM port. Typically, the COM port will be either 3 or 4 but could be another port.

The radio does not need to be placed into a programming mode to communicate with the software.

The health and condition of your computer must be good. Make sure you have an active anti-virus application running and up to date. Install the latest service packs and updates. Close other programs that also use your COM ports.

The above information should solve 99% of the issues reported to date.

- Rob

Navigation

[0] Message Index

Go to full version