Author Topic: can you use lee dies in a redding single stage press  (Read 2316 times)

Offline beagle

  • Prepper
  • **
  • Posts: 18
  • Karma: 0
can you use lee dies in a redding single stage press
« on: November 03, 2009, 12:44:03 PM »
very new to reloading, and have the opportunity to borrow a redding single stage press.  the question is can i use lee dies in a redding press?  lee are cheaper, and i'm on a tight buget

thanks,

-beagle

Offline rfelts

  • Fledgling Prepper
  • *
  • Posts: 6
  • Karma: 0
Re: can you use lee dies in a redding single stage press
« Reply #1 on: November 03, 2009, 01:07:27 PM »
If they screw in the press you should be fine. But in the furture, if you use a diffrent press you will have to resetup your dies for the press. I have Lee dies and I use RCBS Rock chucker, Lee o-ring single stage and a Lee Progress 1000. Good luck and be safe...

Offline Duc1

  • Survivor
  • ***
  • Posts: 166
  • Karma: 4
Re: can you use lee dies in a redding single stage press
« Reply #2 on: December 19, 2009, 10:51:27 PM »
Yes, almost any dies you buy can be used in most presses sold.  I'm sure there are some exceptions buy I have not run into them yet.